LOCTITE® EA 3475 is a 2-part, aluminium-filled epoxy adhesive suited to the repair and recovery of worn and damaged machinery including repairing worn parts such as shafts, housings, keyways, and flanges as well as broken or damaged parts. Useful in filling cavities, leveling machinery, repairing cast-steel plates, making core moulds, applying a sacrificial coating, or sealing leaking pipes.
Loctite 3475 A&B – Metal Set A1 500g
Technical Information
| Chemical Type | Epoxy |
| Appearance (uncured) | Gray, putty |
| Components | Two-part [Resin & Hardener] |
| Mix Ratio, by weight- Resin: Hardener | 1 : 1 |
| Mix Ratio, (by volume) Resin: Hardener | 1 : 1 |
| Cure | Room temperature cure after mixing |
| Application | Industrial maintenance |
| Maximum Gap | 1.0mm |
| Specific Benefit | Low shrinkage properties
Does not rust |
| Brand |
Loctite |
|---|
Description
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
HYLOMAR® ADVANCED FORMULATION
Hylomar Advanced Formulation is a solvent free non-setting and nonhardening compound which is ideal for sealing joints. It can also be used as a gasket dressing. It will enhance the sealing capability of all types of gaskets.
TYPICAL PHYSICAL PROPERTIES
| Colour | Blue |
| Specific Gravity (ASTM D4659) | 1.18 |
| Viscosity Spindle No 6 @ 2.5 rpm. 25°C (77°F). (BS 5350: Part B9) | 250,000 mPa.s |
| Solubility in Water | None |
| Flash Point | Over 392°C (737.6°F) |
| Appearance | Non setting paste |
| Typical temperature range | -55°C to +250°C (-67°F to 482°F) |
| Typical Surface Finish | 2.0 μm Ra |
| Area covered by 100g | 2.0m² |
